That's a bit over my skill level .....

Typically, those curved forms are built using thin layers and pressed in a 2 sided male/female form with lots of clamps for pressure and a vacuum press. The dentil moldings can be bent with hot water or steam and glued in place after the form is complete. Getting the recessed portion in the center is what would stop me ..... :sad2:

A CNC router would be able to rout those curves out of a solid piece, BUT that's just not practical.

 

Typically, those curved forms are built using thin layers and pressed in a 2 sided male/female form with lots of clamps for pressure and a vacuum press. The dentil moldings can be bent with hot water or steam and glued in place after the form is complete. Getting the recessed portion in the center is what would stop me ..... :sad2:
How to Make a Curved Cabinet Door - YouTube


A CNC router would be able to rout those curves out of a solid piece, BUT that's just not practical.

tnx for reply 🙏
i used this way before but the result does not have exact sizes that i want.
you can see the problem of this way in below photo.
https://www.woodworkingtalk.com/attachment.php?attachmentid=392825&thumb=1
i look after a way to create curved doors with exact size that i want. another way that i test from youtube has some other problems such as cnc tools. (photo is attached)
https://www.woodworkingtalk.com/attachment.php?attachmentid=392827&thumb=1
i use wood putty for filling grooves but then i cant use cnc tools.

 

welcome to the forum, Mad.
where did you find that photo ?? somebody somewhere made it
and possibly made a project post about it.
I don't know squat about CNC work.
have you googled "How to make a curved Cabinet Door" yet ??

.

.

 

welcome to the forum, Mad.
where did you find that photo ?? somebody somewhere made it
and possibly made a project post about it.
I don't know squat about CNC work.
have you googled "How to make a curved Cabinet Door" yet ??
"How it's Made".

.

I took the photo from one of workshops in my city but they dont guide me.
i cant use this video because they use 5 axis cnc machine but mine is 4 axis.
So my problem is how to create curved mdf with exact size ?

 

You'll have to find someone with a CNC on here to talk too. I'm sure someone will...

 

Mad - we have a sister website called Router Forums.
it is tailored strictly to the CNC and Hand-Router enthusiasts.
some very talented folks there - maybe they can help you.

.

 

I just found this YouTube video which looks pretty good on How-to: