Woodworking Talk banner
Cancel
Create thread New Forums
Add bookmark
And it gets used a lot.

And it gets used a lot.

  • 0
  • 0
The finished product.

The finished product.

  • 0
  • 0
The night stand finished and installed. The bed is built in permanent with access doors to the storage underneath.

The night stand finished and installed. The bed is built in permanent with access doors to the storage underneath.

  • 0
  • 0
The closet and pantry with the new doors.

The closet and pantry with the new doors.

  • 0
  • 0
Luggage rack finished and installed.

Luggage rack finished and installed.

  • 0
  • 0
Installing the aluminum edging inside the sink hole.

Installing the aluminum edging inside the sink hole.

  • 0
  • 0
Cutting the sink hole. I rough cut it with a jig saw and flush trimmed it with a jig an router.

Cutting the sink hole. I rough cut it with a jig saw and flush trimmed it with a jig an router.

  • 0
  • 0
Nightstand counter top installed.

Nightstand counter top installed.

  • 0
  • 0
Backsplash installed.

Backsplash installed.

  • 0
  • 0
This is installing the backsplash. I glued the plastic laminate directly to the wall edged with an aluminum trim.

This is installing the backsplash. I glued the plastic laminate directly to the wall edged with an aluminum trim.

  • 0
  • 0
This shot shows some detail on the drawer glides I built. They worked out real good.

This shot shows some detail on the drawer glides I built. They worked out real good.

  • 0
  • 0
Gluing up the counter tops.

Gluing up the counter tops.

  • 0
  • 0
Aqua boomerang Formica. I found the last sheet in town.

Aqua boomerang Formica. I found the last sheet in town.

  • 0
  • 0
Securing the refinished kitchen face frame and the night stand.

Securing the refinished kitchen face frame and the night stand.

  • 0
  • 0
After the flooring was installed I installed the bed assemply. Under here is storage as well as the water tank and 12 volt power entry.

After the flooring was installed I installed the bed assemply. Under here is storage as well as the water tank and 12 volt power entry.

  • 0
  • 0
In addition to the cabinet work there was a lot of woodworking to rebuild the framing but we got it very solid.

In addition to the cabinet work there was a lot of woodworking to rebuild the framing but we got it very solid.

  • 0
  • 0
Here's the night stand dry fit in place.

Here's the night stand dry fit in place.

  • 0
  • 0
The new nightstand showing the detail of the bottom of the drawers. I milled maple glides which worked out nice.

The new nightstand showing the detail of the bottom of the drawers. I milled maple glides which worked out nice.

  • 0
  • 0
The luggage rack dry fit in place.

The luggage rack dry fit in place.

  • 0
  • 0
Ready for a dry fit.

Ready for a dry fit.

  • 0
  • 0
The luggage rack sides were mortised and the bottom fit in as a drawer bottom. The front frame is the piece that was originally used on the front of

The luggage rack sides were mortised and the bottom fit in as a drawer bottom. The front frame is the piece that was originally used on the front of

  • 0
  • 0
Another piece of salvaged fir. This one is going to build the luggage rack.

Another piece of salvaged fir. This one is going to build the luggage rack.

  • 0
  • 0
I glued plastic laminate in the corners for the drawers to glide on. In this shot I am installing the kick to the face frame.

I glued plastic laminate in the corners for the drawers to glide on. In this shot I am installing the kick to the face frame.

  • 0
  • 0
This is the face frame for the new night stand. Recycled (salvaged) Douglas fir.

This is the face frame for the new night stand. Recycled (salvaged) Douglas fir.

  • 0
  • 0
Building new drawer boxes. I used 1/2" Baltic birch for the sides and 1/8" Baltic birch for the bottoms.

Building new drawer boxes. I used 1/2" Baltic birch for the sides and 1/8" Baltic birch for the bottoms.

  • 0
  • 0

This album is a collection of shots showing the cabinets and other woodworking items I built for my 1959 Lil Loafer travel trailer. We rebuilt this vintage trailer in 2011. The pictures are in reverse order from the finished product back to the beginning; I can't figure out how to resort them to p
Click to expand...
There are no comments to display.

Album information

Album owner
Carvel Loafer
Date created
Item count
37
View count
170
Comment count
0
Rating
0 star(s) 0 ratings

Album privacy

Carvel Loafer

Media items
414
Albums
10
Can view media items
Everyone
Can add media items
Album owner only

Share this album