[WonderMonkey]

This has got to be one of the most agonizing things of beginning a workshop. I've read the others in the thread and know it is so.

My workshop will be on the top floor of a new addition. The width will be around 24' and the length could be up to 53', in theory, if I took up the entire floor. Naturally the wife would beat me senseless upon the first suggestions of this so I won't mention it. I have to balance getting enough room in the shop to be useful while still enabling the rest of the top floor space to be enough.

Right now I have the floor plan at 24'x16'. I could increase that but I don't want to if it won't be used.

I know that the types of projects and equipment that would be needed control the needed shop size but at these beginning stages I don't know what I'll evolve into.

From you fine people all I would like to ask is those with a workshop close to the size I've "reserved" (24'x16'), do you find it's doable or is it so maddening you go crazy?

 

[WonderMonkey]

Thanks for the input. And more room to hide doesn't work. Her side-to-side footwork is good enough for her to corner me and work the body until I drop my hands. Then it's all over.

 

[WonderMonkey]

I've been looking at the configurations the shop could be to maximize space. Having some mobile machines is something I will be looking at heavily. For sure the "side machines", being planer, jointer, etc., will be mobile. And really, anything I don't feel will be in steady use will be mobile.

 

[WonderMonkey]

I will have some drying racks but I think some plastic hanging around them will do find for my needs. A small paint booth is needed as well.

 

[WonderMonkey]

Build it as big as you can afford to build, then be as frugal with your space as possible.

Sound advice. My issue is I can make it as large as I need, but will sacrifice the size of the room adjoining it. So I have to find my "magic number" and go with it.

An update to this is that I am going to make the attic my paint and finish room. I'm going to use the rafters that allow walking down the middle and use the space to smartly construct an area to paint and then use the area between the rafters as racks to let things sit and dry. I think that will really free up some space in my actual workshop. I have to look into the reality of being able to store paint, etc. in that area as I suspect it will be warmer, as attics usually are.

 

[WonderMonkey]

:laughing:, ex boxer here...don't step straight back, keep your chin down and elbows in tight. The bad part is she knows where you sleep. If she is a dirty fighter, a feller could wake up with a black eye :huh:.

Shop organization I have found is an evolution thing. A good "original" plan is a sound idea, but you will still be dragging them around to fit a new tool in (and there are always new tools). My suggestion would be make sure you have plenty of amps to run the tools, put in a separate breaker box for the shop. Leave yourself room for "expansion".

The bad part is from what I am understanding is you are making the shop up stairs, that sucks. Dragging lumber up is a pain, dragging finished projects down is even worse.

Yeah she cheats in fights. That's why I love her.

Yes my workshop is upstairs and will suck on occasion. I'm sure when I am carrying lumber upstairs and more when I'm carrying a project back down the stairs I will be cursing. But.... It's either that or use half of the garage for a workshop so I think I have the better of the two. And a separate breaker box is in the plans. If I was to pop a breaker and kill the blender while the wife is making margaritas then the fuse is lit and she's coming at me from all angles.

 

[WonderMonkey]

Here is something I found for a small work shop check this out.
Bruce.http://www.taunton.com/finewoodworking/Workshop/WorkshopTour.aspx?id=22880

Very nice. I'm going to put it on graph paper and lay things out. As part of adding onto our house we are redoing the entire kitchen. I will have lots of counter tops and cabinets to put in my workshop to hold stuff. It won't have to be attached to anything which will give me some time to see how things flow.

 

[WonderMonkey]

Podcast #10? Where for art thou these podcasts?

 

[WonderMonkey]

Excellent. I'll kill my network over the next day getting all of them. Thanks for the link.

 

[WonderMonkey]

Just make the stairs "abnormally" wide if you can... go 42 or 48" wide instead of 36".......... see if you can make the run longer as well......
it'll make it easier to get larger stuff up and down.

Good thinking. I was also considering putting in a double door at the top of the landing to make things easier.

Or hey, maybe just make it a rope ladder for the challenge.

 

[WonderMonkey]

This might werk...

http://www.woodworkingonline.com/category/podcast/

Podcast #10 is excellent. I'm only part of the way through it and already I've stolen plenty of ideas from it.

 

[WonderMonkey]

I watched several yesterday. Stayed up late. This is great information for a person such as myself.