Woodworking Talk banner
1 - 6 of 6 Posts

·
Registered
Joined
·
42 Posts
Discussion Starter · #1 · (Edited)
WorkBench

I built a new workbench over the summer and I think it turned out pretty nice.



I made the table out of pine. For the top I used a solid core door and then placed a 1/4" hardboard on top of it. For the assembly I primarily used glue and screws, but I also used some pocket hole screws for some of the joints. I based it on a design that I got off of amazon.com. It's a pretty nice plan and it included various upgrades you can make to it. The picture below of the drawers is one of the upgrades I made.



If you want to see how I made this, and the upgrade I made to check out my blog entry over at: www.woodlogger.com


.
 

·
Turning Wood Into Art
Joined
·
4,043 Posts
Nice, I'll have a place for it by Christmas I hope.

Dave The Turning Cowboy
 

·
Registered
Joined
·
1,439 Posts
Very nice...It will make a good backround for all those project photos you are going to post.
 
1 - 6 of 6 Posts
Top