Woodworking Talk banner
1 - 3 of 3 Posts

·
Senior Member
Joined
·
7,222 Posts

·
Senior Member
Joined
·
7,222 Posts
I got no clue the threads measure 3/4 in across and I count 7 threads in the half that I count on there. the pipe I put on there is 1/2 in with 14 tpi black pipe. Wish I new which plate would just screw on there's a million sizes and tpi. Or a drill chuck
Likely you have 3/4in dia x 16 tpi. You need a spindle adapter like this one to get to a more common size 1in dia x 8 tpi.

http://www.pennstateind.com/store/LA3418X.html

Once you get to a common size then you can buy a spindle tap which will allow you to make your own wooden faceplates.

http://www.leevalley.com/US/Wood/page.aspx?p=57074&cat=1,330,49238&ap=1

Or you can purchase metal faceplates.

http://www.pennstateind.com/store/lathe-faceplates.html
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top