Woodworking Talk banner
1 - 12 of 12 Posts

·
Registered
Joined
·
293 Posts
Discussion Starter · #1 ·
I do not know my router bits! But, I'm learning slowly and I keep the box or the tag that came with them so I do learn. I was hoping that some could help me with the picture I have and tell me what router bit is used. It is on a cabinet door. Thanks

Wood Plywood Hardwood Wood stain Furniture
 

·
Registered
Joined
·
293 Posts
Discussion Starter · #4 ·
lilman said:
Can't tell too well from picture so I've include my own of what I think your looking for. If so it's a roundover bit
I wish it was a round over, it seems to be rounding over the digging into the wood.

Wood Plywood Room Material property Hardwood



Wood Table Plywood Furniture Hardwood

These are two more photos that may help my description. Thanks
 

·
Old Methane Gas Cloud
Joined
·
3,500 Posts
First guess would be the door edge Ogee.

Second guess would be two bits. Round over and cove w/o bearing or core box.

Third guess would be flute and round over.
 

·
Registered
Joined
·
27,644 Posts
It may very be an ogee bit but I suspect you are looking for an exact match to the existing cabinets you have. Chances are an ogee bit will be close at best. They are more difficult to find today but if you get a cheap high speed steel ogee bit instead of carbide you can put it on a grinder and alter the shape of it until it does match exactly to your existing cabinets.
 
1 - 12 of 12 Posts
Top