Woodworking Talk banner
1 - 11 of 11 Posts

·
Registered
Joined
·
189 Posts
Discussion Starter · #1 ·
This is a wedding ring box i made to hold my wife and I's rings. my son carried it to the pergola. My wife made the pillow.

Tiger maple, with a inset mahogany panel. Finished with 2 coats of tung oil and then wax.




 

·
Maker of sawdust
Joined
·
460 Posts
rings

Very nice good choice of woods If I may make a suggestion. It is about the chain it is to heavy for the box and has a shape that will be hard on the wood if it gets caught in the box when closed. Maybe a chain from a necklace would have a softer look as well as being easier on the wood. Would hate to such a nice piece get damaged. Wish you many years of happiness

Jerry
 

·
Registered
Joined
·
1,578 Posts
Very nice, it appears that the top and bottom are from the same piece of wood, NICE TOUCH.....

Regarding the chain, not a major issue, but a smaller chain could be considered.

What is the measurements of the box?

Good job,

Dale in Indy
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top