Woodworking Talk banner
1 - 10 of 10 Posts

·
HALL OF FAMER
Joined
·
8,686 Posts
Discussion Starter · #1 ·
There seems to be some demand for this, so I will show you how I made a lightbox for taking better quality photos of my woodworking projects. This is, by no means, the only way to do it and the dimensions that I give you here are only the ones that I used. Feel free to change the dimensions in any way that you wish, but keep in mind, that you will also need to get larger poster board if you make it bigger than I did.

The materials for this are simple.
1/2" abs flexible plumbing conduit (amount will depend on the dimensions you decided on)
1/2" T-fittings
1/2" 90 degree bends
1/2" end caps
#6 wood screws
wooden dowel to fit the inner diameter of the conduit
different colours of poster board
an old bed sheet (white)

We start of by cutting the legs. I actually have 2 sets of legs. One shorter and one longer. I sometimes mix and match 2 long and 2 short to get different heights in the front of the box, without changing the size of my background material. (you'll understand more in a bit)

Cut four pieces at 14" and another four pieces at 18" (if you want longer legs)
Attach end caps on one end and a 90 degree connector on the other. You will also need to cut several 1" pieces that will be glued in to the 90 degree connectors for joiner pieces. Assemble the legs as shown. I glued mine in, but you don't have to if your don't want to.
Wood





You will then need to cut two pieces measuring 16 1/4" long. A T-fitting is attached to each end of these pieces. Assemble them as shown here and you want to make sure that the T-fittings are parallel to each other.
Wood Hardwood Plywood





You will then need to cut 2 pieces measuring 23" long. Set one piece aside.
Wood Wood stain Hardwood Wood flooring Floor




With the second 23" piece, you will need to insert small sections of dowel into the conduit and drill and screw in 3 #6 screws. The dowel is to give the screws some stability. Don't screw the screws all the way in, as they will be used later to hang our poster board. You want them to protrude a little.
Wood Hardwood Wood stain Floor Plywood



Table Ceiling Wood Metal
 

·
HALL OF FAMER
Joined
·
8,686 Posts
Discussion Starter · #2 ·
That's it for the cutting of pieces. Now you want to assemble your pieces. Don't glue these together, because you'll want to take it apart when you are done taking photos for storage.
Assemble the top as shown here.
Wood Table Furniture Plywood Wood stain



Insert the legs, again without glueing, and you should have something that looks like this.
Table Furniture Desk Wood Chair




You'll also need several sheets of poster board. As you can see, I have accumulated quite a collection of colours. Using a single hole punch, you will want to punch 3 holes in the shorter end of each sheet, that will mimic the spacing of your #6 screws.
Construction paper Paper Wood Wood stain Paper product





Hang your chosen colour of poster board from your screws.
Table Furniture Desk Room Wood





Hang your sheet over the top of the box and shine a light in from the left, the right and the top. In this case, my dining room light serves as the top light. These don't have to be spot lights. Just something that will illuminate the inside of the box.
Table Room Furniture Technology Desk
 

·
HALL OF FAMER
Joined
·
8,686 Posts
Discussion Starter · #3 ·
From here, it's play time. Experiment with different colours of background and positioning your lights in different ways. This is a simple piece that I cut a few years back but I took several pictures of it using different background colours to show you the difference a background can make.
Sculpture Figurine Rat Plant Art


Plant Houseplant Flower Ikebana Art


Trophy Figurine Sculpture Carving Metal


Houseplant Sculpture Plant Art Bonsai


Plant Trophy Sculpture Art
 

·
HALL OF FAMER
Joined
·
8,686 Posts
Discussion Starter · #9 ·
Nope, nothing fancy here. I have a Canon Powershot SD780 IS.
It's a digital point and shoot. I used to be into photography years ago and even developed my own black and whites. I don't do it anymore and I love my point and shoot. Wouldn't trade it. Another thing that you may want to consider, is that 8MP is plenty to get a good quality photo. Unless you are going to blow these pictures up to an 11"X14" format, 8MP is more than sufficient.

Camera Digital camera Cameras & optics Camera accessory Point-and-shoot camera
 

·
HALL OF FAMER
Joined
·
8,686 Posts
Discussion Starter · #15 ·
If you are using incandescant bulbs like the one on the left here,
Do Not leave the area with the lights on! The heat from the bulb may ignite the cloth and cause a fire!



That is a great warning Bill and I agree with you whole heartedly, however, the light on the left in this photo is actually a compact flourescent floodlamp. It doesn't get hot. Your warning does have merit though. Thanks for pointing that out. I sometime forget that, just because I know it's a CFL, everyone else doesn't know. Incandescent floods can get very, very hot and being that close to a linen sheet, the risk of fire is very very real. Be careful guys.
If you are using an incandescent lamp, like Bill says, do not leave the light box unattended with the lamp on.

Here's a photo of the lamp for those of you who didn't know such a thing existed. You can see the CFL inside the flood lamp globe.

Hat Fashion accessory Headgear Fedora



Circle Cup Ear
 

·
HALL OF FAMER
Joined
·
8,686 Posts
Discussion Starter · #18 ·
Thanks for the kind words guys. This is a very simple project (as you can see) to make. As far as larger projects go, here's a thought. Whenever I get the finish put on my motorcycle, I intend on using a light box to take photos. I took the original photos in the light box pictured, but it was tight. A 4 legged coffee table, or dining room table turned on its side, with a sheet draped over it and a background poster board will do the same thing. If you don't have a lot of larger projects and don't want to increase the size of the light box, a table on its side will do the same thing. As long as the light is filtered from the top and the sides, you're in business.
Ken
 

·
HALL OF FAMER
Joined
·
8,686 Posts
Discussion Starter · #30 ·
That's great. The first draft of our lightbox was a cardboard box with vellum. We made it to see if we liked how it worked. When we found that we were using it more and more and the box was getting beat up and we were tired of seeing it sitting around, we decided to make something a little more collapsable. (sp?) But indeed, the cardboard box works just as well as my lightbox project. Thanks for bringing that up. Great idea.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top