Woodworking Talk banner
1 - 5 of 5 Posts

·
Registered
Joined
·
485 Posts
Discussion Starter · #1 ·
A couple years ago I needed to get my clamps out of the way. Hanging here and there, laying in the way, etc., so I made a temporary hanger to put them on. It worked well enough but had a slight lack of muscle and a sag in the middle.



Today I bought 10 new Jorgs and in a few minutes had a "simple" way to store them. Just like the old one but with a little more arse.
3/4 ply with 1/4"+ dados 2-1/2" deep, on 1-1/4" centers. More screws holding it up and braces on the ends. Works for me.:yes:
Shelf Collection

Some of the Jorgs have a "dimple" punched right below the top jaw that got in the way. A sidegrinder and a cutter wheel fixed that.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top