Woodworking Talk banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,048 Posts
About a year ago I bought a piece of 3/4" oak veneer ply from Lowes and it was better then the cabinet grade I bought from the local cabinet wood supplier. Very few voids within the plys. Than about six months later I returned to buy another piece, it was the only one they had left. I asked them to cut it into 4 X 4 to get it in to my car. When he cut it in half the plywood split in half between plys. Yes now there were 4, 3/8" thick pieces of plywood. Good thing I had them cut the wood other wise I would have needed to make a 150 mile trip to return it. One of the joys of living in the boonies.

I wish I had a good source to buy cabinet grade oak veneer plywood. Up here if the plys are good the veneer is bad and if the veneer is good the plys are bad.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top