Woodworking Talk banner
1 - 2 of 2 Posts

·
Registered
Joined
·
116 Posts
As far as type of wood goes,, No problem at all.
If you are ripping studs, you may have a hard time finding reasonably clear rips or rips with small enough knots so the trim doesn't break at the knot.
Poplar is cheap and may be a good choice, also wormy maple, even yellow pine and white pine.
jim
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top