Woodworking Talk banner
  • Hello Everyone! Let us know what you would spend a $50 Amazon gift card on, HERE For a chance to win a $50 Amazon Gift Card!
1 - 1 of 1 Posts

·
Registered
Joined
·
29 Posts
I have a similar version of that saw. Mine was made by Orion for Farm and Fleet. Pretty close to the design but mine tilts the other direction so the bump out for the motor is on the other side. Same fence. I have often contemplated upgrading it also. It is the worst fence I have used, but defiantly not the best. I have thought about upgrading the rail and getting the fence linked above from very super cool tools. On the other hand I have thought about going the cheaper route of giving it a tune up and mod it a bit, and adding a one piece rail in the front that is a bit longer. I keep going back and forth about it. I guess you could say I am on the fence....
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top