Joined
·
274 Posts
Who has a jig to be able to cut precise thin staves on a tablesaw?/ I am talking 1/4" staves. Thanks in advance.
Staves
1 - 4 of 4 Posts
Joined
·
28,384 Posts
1/4" x what? I don't have any problem ripping 1/4"x 2 7/8" wood just ripping it against the fence.
Joined
·
31,216 Posts
barrel staves?
Like these? http://www.independentstavecompany.com/staves_heading
If you want to make a barrel, the staves need to be steam bent and have angled edges OR curved in a double sided planer.
If you just need 1/4" wide strips that's easy as suggested. Maximum capacity of a 10" table saw is about 3" in one pass...double that for 2 passes and an end to end flip.
Cool site:
http://www.barrelwinecellars.com/welcometoourshop.htm
Like these? http://www.independentstavecompany.com/staves_heading
If you want to make a barrel, the staves need to be steam bent and have angled edges OR curved in a double sided planer.
If you just need 1/4" wide strips that's easy as suggested. Maximum capacity of a 10" table saw is about 3" in one pass...double that for 2 passes and an end to end flip.
Cool site:
http://www.barrelwinecellars.com/welcometoourshop.htm
Joined
·
24,017 Posts
1 - 4 of 4 Posts
Join the discussion
