Woodworking Talk banner
1 - 5 of 5 Posts

·
Old School
Joined
·
24,011 Posts
You can also use euro hinges. Mounting plate gets attached to a cross piece which could be a floor to the shoe rack. The bottom of the door protrudes down past the bottom of the shoe holder, and gets bored for the hinges. Works good for hampers too. There needs to be a tip out restraint...like a cable or a small chain.






.
 

·
Registered
Joined
·
1 Posts
I know this thread is over a year old but since this link is the #3 result when you search google for shoe cabinet hinge I thought I would post what I found in case it helps anyone else.

I ordered from here: https://www.hardwaretree.com/proddetail.php?prod=XSC/1

Shipping was reasonable and arrived in Hawaii 3 days later. Which is pretty impressive. It doesn't come with any hardware other than the round plastic pieces that make up the pivot mechanism. Anyway, hopefully this helps someone else down the road.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top