Woodworking Talk banner
1 - 7 of 7 Posts

·
Registered
Joined
·
73 Posts
Discussion Starter · #1 ·
I built this recently, and hung it in a handy spot close to where it is needed. My version was taken from a picture I found by Googling: French Cleat Storage in a Workshop.

Credit goes to the guy who posted it. I actually expanded it a bit to include the bottom portion, to fill a need. This can be moved anywhere on the wall, just by sliding it along the cleats.
 

·
Registered
Joined
·
73 Posts
Discussion Starter · #5 ·
Dale,

Here is a picture which will show that detail. I cut 1/2" dowel rod on an angle, and drilled the holes in the plywood on the same angle. The dowels were then glued, inserted, and left to dry.
 

Attachments

1 - 7 of 7 Posts
Top