[motackmaker]

I am looking for instructions that show you how to set up a router to a router table. A friend gave me his table but I have no instructions on how to attach or set up the router to the table.
I have a little Ryobi router table with a on/off switch on the leg of the table. I have no other numbers are any other numbers to identify this table

any help is most appreciated
thanks

 

[Dave Paine]

A router typically is attached to a router table by screws through the base into the table.

Normally there would be 3 or 4 screws depending on how the holes in the router base line up with the holes in the table.

Post a picture of the table and the base of the router if you want any detailed answer.

 

[4DThinker]

If there are no holes in the top, then there may be some sort of clamps underneath to hold the router in place.