[miked187]

how does on remove these nails on the cabinet knob faceplates? Not enough meat on the head to grab them, is there a special tool?

 

[mdntrdr]

If you are wanting to save the hardware, I would probably drill them out. :smile:

 

[miked187]

If you are wanting to save the hardware, I would probably drill them out. :smile:

Not wanting to save, hardware update project

 

[mdntrdr]

Not wanting to save, hardware update project

Slide/drive something thin (sharp putty knife) under the plate and work them loose. :smile:

 

[miked187]

after some careful poking and prodding the putty knife did the trick, thanks for the pointer in the right direction