A friend of mine gave up trying to revive this huge red oak and had an arborist take it down. He wants it to go to good use so if anyone in the North Texas area is interested just let me know. I'll be hoarding some but I won't be able to make a dent in all this timber.
Red oak anyone?
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
WoodturningI am in need of what I call Texas Road Wood which is essentially found on the side of the road. I probably wont turn more than 12" diameter. What are some reasonably priced chainsaws in the 14 to 16" range? It will live in the tool box in the bed of the P/U It wont be used very often. Just when...
- 26
- 365
-
Tony B · updated
-
WoodturningI’m relocating to Abington Township & looking for other woodturners in the area!
- 6
- 99
-
Suzanne · updated
-
I have an older Penn State light duty wood lathe. It has a nice live center on the tail stock which is threaded, and NOT tapered. I would like to find an exact replacement. I have searched many times on the internet, with no success. Please let me know if you know of a place that supplies...
- 6
- 228
-
WoodturningHow would you guys turn something like this? It's two inches tall, sixteen inches wide from point to point (max for my lathe is sixteen and a quarter so I'm cutting this rather close.) The flat bit on top is two inches wide and the one on the inside is eight and a half inched wide. Both of those...
- 2
- 126
-
WeebyWoodWorker · updated
-
WoodturningLong story short, I'm not in a good mood, family situation is on fire, don't worry about it. I need to make an urn. Something something it's basically a large vase right? I'm planning on segmented rings, probably walnut. I've got some rough math figured out for the footage needed. Main...
- 14
- 556
-
WeebyWoodWorker · updated
