[presdo]

Hey everyone, new guy here!

This shall serve as an introduction as well as my first project thread. I'm 18, studying industrial design at school, and really like building stuff.

So this table was built for a friend using materials that were not only recycled, but also sustainable. The table was to be set in a small kitchen which called for a small (3'x4'), but functional size. The legs are galvanized steel pipe, joined by the appropriate pipe fittings. The four legs are 1" pipes, while the cross braces pieces are 3/4". The table was joined together by pegs, dowels, and titebond II wood glue.

Pics.



Sorry for only three pictures. I have pictures of the process if you guys are interested. I would love some feedback from you guys!
Enjoy!
P

 

[Travico]

That my friend, is a very good piece of work. Use of different materials together show talent.

 

[presdo]

Thanks man! I really, really enjoyed working on this project actually. It was more fun than I anticipated! I'm not totally sure what type of wood was used, but most of it was different. Pulling the nails and staples took a while by themselves!

Any other thoughts from members? Always looking for ways to improve!