[kenkrizan]

The Alaska mill is adjustable, so a longer mill can fit a shorter bar. When installed you will lose about 9-10" of cutting space- so a 20" bar will give an effective 10" log dia. cut. So buy the mill at least 10" longer than your anticipated future bar length. And remember- you cannot stick any bar on a power head. You need enough power to pull a longer chain.

Ken

 

[kenkrizan]

I want to re-word that last post. It is not a 10" log per se- but rather a 10" cut, so you can get a 10" can't from the log.

Ken