Woodworking Talk banner
1 - 1 of 1 Posts

· Master firewood maker
1,973 Posts
I would use 2 pieces of 1/2" ply, laminated (face-glued) together, with six 1/4-20 tee-nuts embedded between the layers. That would allow me to secure it to the frame from below, which would help keep it from warping. It would also allow me to take it off and clean it or re-cover or replace it should something happen to it.

I would also paint the ply after laminating it but before covering it with some durable exterior paint to help protect it from the humidity.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.