Woodworking Talk banner

New Hidden and not so hidden mazes.

4K views 21 replies 6 participants last post by  mja979 
#1 ·









I have been far to busy with the 9-5 here are a couple of mazes I have been working on. I will have more pictures up by Monday. Thank you for your interest and comments.
 
See less See more
4
#6 ·
Finished!

Maple

[/URL]

[/URL]

[/URL]

Cherry

[/URL]

[/URL]

[/URL]

Walnut

[/URL]

[/URL]

[/URL]

This maze can be played many different ways. Notice there are two steal bearings inside.

1. Traditional both bearings need to make it from one end to the next.

2. Each ball must make it to either end to completed the game.

3.Each ball must make it to either end, but if a ball makes it to the wrong end then you loose.

4. Each ball must make it to either end, but if they touch while in route the you loose.
 
#12 ·
mja979 said:
Did you take a look at the link?

If so let me know and I will try to make it more clear.
Thanks, I checked out the link.

Did you use a stop block on your router fence or mark start/stop points on it?

I'm also interested in your design process.

How do you determine the path layout?
 
#15 ·
I see I will have to add a picture. I used the drill press to drill into the interior in four place after I used my router.

I used the router with the fence fixed to cut all paths near the edges and then made an adjustment to make the center cuts.


In this picture you are able to see to hole drilled by my press.

The other holes connect to the two picture.

 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top