Woodworking Talk banner
1 - 7 of 7 Posts

·
Registered
Joined
·
70 Posts
Discussion Starter · #1 ·
hey to all,

I just put a thing on youtube about blotching and it is the hardest one ive done,trying to explain this in the 10 min youtbe allows is tough,thus my question ,do you understand it or do i need to further break it down into more segments and details, thanks for your help

http://www.youtube.com/watch?v=ggahTWVHvBw

post your thoughts here or email me [email protected]

thanks to all i just want to get it good and right
 

·
Registered
Joined
·
273 Posts
I'll give you a tip, when your signing up to get a youtube account, somewhere in the signup process it lets you choose regular (defualt) or executive (optional without charge). The difference is that the regular only lets 10minutes per a video. The excutive is as long as you want!
 

·
Registered
Joined
·
70 Posts
Discussion Starter · #3 ·
gee steve ,thanks a ton ,Im a lot better with wood than these puters,I can make wood do most anything i want, I seem to only be able to crash computers
 

·
Registered
Joined
·
714 Posts
hey to all,

I just put a thing on youtube about blotching and it is the hardest one ive done,trying to explain this in the 10 min youtbe allows is tough,thus my question ,do you understand it or do i need to further break it down into more segments and details, thanks for your help

http://www.youtube.com/watch?v=ggahTWVHvBw

post your thoughts here or email me [email protected]

thanks to all i just want to get it good and right
Very GOOD Charles!

I see you have just a few more videos to watch... will try in my spare time. :smile:

The Blotching topic reminds me of
Knipfer's Rude & Crude method of Finishing:
http://www.woodworkstuff.net/woodidxfin.html

It does work... and it gives good results...

Thank you...
 

·
Registered
Joined
·
70 Posts
Discussion Starter · #5 ·
Thanks Joe, just tryin to share a lifetime of experience

experience= mistake +mistake+mistake...........I have alot of experience(laughing)
 

·
Registered
Joined
·
267 Posts
Charles.
I alway enjoy seeing your videos I watch them all the time, however this one I had to watch twice to get a full understanding of what you had to say but that is me someone else might have got it the first time around keep up the good work.

Bruce.
 

·
Forgotten but not gone
Joined
·
5,674 Posts
I like everything about your videos. Can't think of a single thing I would do any different. I shared one of your videos on another forum and at least one luthier was glad I did.
It was the one where you use a bandsaw, table tilted to match the ring angle, to remove a check from a short but desirable board. I chocked that little trick away in my memory bank.
Thanks for participating on our forum you are truly an asset.
 
1 - 7 of 7 Posts
Top