[Medevack1]

Hi first of all thank you for all the good coments on my pistol grips. Im having some issues with my bandsaw, as i stated before im new at this so im lost :wacko: , The Bandsaw is a 9" GMC bandsaw, the blade is NEW and so is the belt, if i cut 1/4" thickness is fine but when i try to cut anything over3- 4"s it gets jammed and wont cut, also when i try turning to make a curve it doesnt fillow the path im attempting to cut. Is it that i have a cheap bandsaw? or am i doing something wrong?

Thank you in advance!!!!:thumbsup:

 

[toolguy1000]

....... Is it that i have a cheap bandsaw? or am i doing something wrong?

Thank you in advance!!!!:thumbsup:

that might be the case. i'd start with this video on BS set up and make sure all the saw's adjustments have been dialed in and that the proper size blade is being used for the cuts being attempted:

https://www.youtube.com/watch?feature=player_embedded&v=wGbZqWac0jU

 

[Medevack1]

Thank you for the help!!!!!