Woodworking Talk banner

Need help to "tune up" Delta table saw

3K views 5 replies 3 participants last post by  farmall 
is the height control "locked"?

If there is build up of old sawdust and resin on the threads you will have a difficult time with the height and angle adjustments. If possible turn it over and clean the threads and gears wiith a solvent like brake cleaner and blow out the dust. Then give it a light coat of light oil or silicone on the threads. You'll be surprised how much difference that will make. :yes:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top