Woodworking Talk banner

21 - 40 of 58 Posts

·
Registered
Joined
·
693 Posts
Discussion Starter #22
I cutted pieces of dispanser today. . It is not finished yet. .


SM-J700F cihazımdan Tapatalk kullanılarak gönderildi
 

·
Registered
Joined
·
693 Posts
Discussion Starter #23
I added mini shelf for my am fm radio clock and my hot water machine in my workshop.. Yes i like to so much to drink hot coffee and tea..


SM-J700F cihazımdan Tapatalk kullanılarak gönderildi
 

·
Registered
Joined
·
693 Posts
Discussion Starter #24
I finished to cut wooden numbers for wooden calendar and sandpaper numbers..
Yes my next project will be wooden perpelatuar calendar..


SM-J700F cihazımdan Tapatalk kullanılarak gönderildi
 

·
Registered
Joined
·
693 Posts
Discussion Starter #25
My woodwork shop name will be " partridge rehabilitation center"
I finished my sign..


SM-J700F cihazımdan Tapatalk kullanılarak gönderildi
 

·
Registered
Joined
·
693 Posts
Discussion Starter #28
I painted it with yellow today.. Numbers will be black color.. I will make french cleat system.. i will hang it on my wall ..


SM-J700F cihazımdan Tapatalk kullanılarak gönderildi
 

·
Registered
Joined
·
693 Posts
Discussion Starter #29
I started tape holder project for my work shop. . I will make 4 more same tape holders ..I have to be so busy these black days..


SM-J700F cihazımdan Tapatalk kullanılarak gönderildi
 

·
Registered
Joined
·
566 Posts
422861


,,,,,,,,,,,,,,,,,,,,,,,,,,,, I considered a design similar to the one you suggested above.

The problems with the long pole holder are:
  • Changing one roll is a hassle, because you must organize all the rolls.
Tool Agnostic,

While your statement is correct, in the design suggested above, changing one roll has no effect to any other roll. Each roll hangs on it own dowel rod. The rolls of paper AND the individual dowels rods are separated by the plywood supports between each roll. The notch for the dowels is cut in from each side and NOT all the way thru the supports.


422862
 

·
Registered
Joined
·
4,054 Posts
Tool Agnostic, While your statement is correct, in the design suggested above, changing one roll has no effect to any other roll. Each roll hangs on it own dowel rod. The rolls of paper AND the individual dowels rods are separated by the plywood supports between each roll. The notch for the dowels is cut in from each side and NOT all the way thru the supports.
Good points. Thank you.

I noticed it a while ago but didn't say anything; it seemed visually apparent to everyone. One consideration with @faith michel's design is the individual supports have width that reduces available sandpaper storage compared with a single long pole (a design I rejected).

I like faith michel's design for its ease-of-replacement and built-in tear-off bars, but for our specific situation, the separate peg design may be better. It is partly about storage density, and partly about sandpaper roll portability.
 

·
Registered
Joined
·
693 Posts
Discussion Starter #35 (Edited)
Guys
I have a question. .I want to build a whiteboard but i dont want to paint.. I want to use direct.. what metarial i have to use ??
My options..
1) White MDF
2) White formica
3) White laminate
OR
I can use a metal metarial.. Forexample scrap white refrigerator (fridge) door
Thank you so much for your answers..
 

·
Super Moderator
Joined
·
4,069 Posts
Faith - can you gather up some scrap materials to test your projects with?
here at the Home Centers, there are inexpensive plastics just for white marking boards.
you would have to do your own tests on boards that you paint yourself.
 
  • Like
Reactions: faith michel

·
Registered
Joined
·
693 Posts
Discussion Starter #39
Faith - can you gather up some scrap materials to test your projects with?
here at the Home Centers, there are inexpensive plastics just for white marking boards.
you would have to do your own tests on boards that you paint yourself.
I tested it with with white mdf yesterday john .. it looks not bad.. i guess i will make it with mdf..


SM-J700F cihazımdan Tapatalk kullanılarak gönderildi
 

·
Registered
Joined
·
693 Posts
Discussion Starter #40
I montaged black numbers and blade today..


SM-J700F cihazımdan Tapatalk kullanılarak gönderildi
 
21 - 40 of 58 Posts
Top