Woodworking Talk banner
1 - 1 of 20 Posts

· Registered
1,745 Posts
@John Smith_inFL
I know this has been discussed, but i’m too … something … to go searching. I want to make a mold of a screwdriver handle. What products should i buy?
I would get yourself a small piece of 1/4" or 1/2" MDF and scribe or trace the pattern. Rough cut with a jigsaw, bandsaw, or whatever close to the line. Use a pattern makers rasp and file it to a perfect fit.
1 - 1 of 20 Posts