Joined
·
7,222 Posts
Looks like checking to me. Not unusual during drying to get some checking, although this is more than most slabs. Perhaps not the best moisture control during drying.
Let this sit in your shop to reach closer to your shop moisture level.
If the checks are superficial and do not change, I would leave them. Look to be too small to get epoxy in the cracks. Too many to use CA glue due to the expense.
Let this sit in your shop to reach closer to your shop moisture level.
If the checks are superficial and do not change, I would leave them. Look to be too small to get epoxy in the cracks. Too many to use CA glue due to the expense.
