[harry nuckle]

I am rebuilding a couple cabinets that were ordered the wrong size, usually not a problem but I am having difficulty finding material to create the circular back panel for the lazy susan. The one I removed was 1/16 thick cardboard/mdf, and I cant seem to find it or anything else that can bend to the tight radius.. just wondering what you cabinetmakers out there use

 

[MNsawyergp]

Most lumber stores have Masonite in 1/8" or melamine panels could work, also.

 

[wooddude]

you could try kerfing a piece of 1/4 inch plywood with the outside veneer running horizontal

 

[kreuzie]

There is a product called Bending Plywood. Check with a sheet goods retailer or a real lumber yard.

columbiaforestproducts.com/Products/Radius

 

[harry nuckle]

Thanks guys I finally found someone that stocked bending plywood. Masonite didnt work with such a tight radius and I didnt have the luxury of waiting for someone to order bending plywood.. luckily after a ton of phone calls and a lot of driving I got a sheet