Joined
·
80 Posts
Jewelry box in Sydney ********, with Red Gum lid frame and Canadian Rock maple trays. 12"x8"x4" (plus 1" lid. Scandinavian Oil and wax finish.
Regards,
Orson
Regards,
Orson
Jewelry box in Sydney ********
Join the discussion
Recommended Reading
-
Project ShowcaseThis may be an interesting thread, and could prove to be inspirational to help each other with ideas! So, what is you single most-best project you have ever built? This is a good chance to share your creativity and craftsmanship! So many of you may have have a hard time choosing between the...
- 23
- 624
-
TimPa · updated
-
Project ShowcaseIt's been a while since I've returned to the forum, I wonder if anyone still remembers me. This time I'm going to show you guys my new finished project, it's a vintage style bed, the patterns are all hand carved. The process of carving the headboard can be seen below
- 4
- 143
-
classicwoodworking · updated
-
Project ShowcaseHi guys, it's me again. I would want to share with you hanging TV stand which i made for my home in modern style but i didn't hang so far. Material for manufacturing i used MDF and Oak. I think that many of us will want to make it too or similar. What are you thinking about it? Would do you...
- 24
- 453
-
K1ngwind · updated
-
Project ShowcaseHere is a serving tray I designed during a boring time due to Covid, handle idea was from a magazine article. The bottom is solid woods of Big Leaf Maple, Walnut, quarter sawn Sycamore and Mahogany carefully planed down to 3/8" by hand and tapered to 1/4" to fit into slots. Sides are quilted...
- 3
- 187
-
Project ShowcaseHere is an occasional table made out of some really pretty quarter sawn Sycamore found at a small mill last year. Found this article - Popularwoodworking/article/arts-crafts-occasional-table/ - on the internet one night and decided had to rise to the challenge. Be careful as I ran into some...
- 2
- 169
