Woodworking Talk banner
  • Hello Everyone! Let us know what you would spend a $50 Amazon gift card on, HERE For a chance to win a $50 Amazon Gift Card!
1 - 2 of 2 Posts

·
Super Moderator
Joined
·
5,269 Posts
Corey,
Pick out what kind of glides you want to use. That will dictate how much to deduct from the width of your drawer box. Height of the box just has to be shorter than the opening. Mount the drawer box and allow for the thickness of the drawer face when you do it. Make the drawer face with an 1/8" margin all the way around it. Use a shim on each side to hold the drawer face in place and mount with a couple of screws from the inside of the drawer box. Take your time laying everything out and it shouldn't be that hard. Use some decent ball bearing glides and it will make it easier to center the drawer face in the opening and have it stay there. Good luck,
Mike Hawkins:smile:
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top