Joined
·
32,680 Posts
Posts by woodnthings
1 - 2 of 2 Posts
Joined
·
32,680 Posts
get help
Take it to a machinist or machine shop. It's a tricky procedeure if you have never drilled out a screw. The drill must be centered on the screw head and use firm but gentle pressure on the drill motor. You must drill perpendicular to the cutterhead.
Get help. :yes:
Take it to a machinist or machine shop. It's a tricky procedeure if you have never drilled out a screw. The drill must be centered on the screw head and use firm but gentle pressure on the drill motor. You must drill perpendicular to the cutterhead.
Get help. :yes:
1 - 2 of 2 Posts
