Woodworking Talk banner
  • Hello Everyone! Let us know what you would spend a $50 Amazon gift card on, HERE For a chance to win a $50 Amazon Gift Card!
1 - 2 of 2 Posts

Old School
24,017 Posts
There are small holes for a supplied tension rod to turn the knuckle to increase or decrease the tension. Here are general instructions, maybe not specific to your brand.

Shut the door and find the adjustment slot on the upper knuckle on the hinge's pin barrel. Locate three tiny holes within the slot.

Slide the tension adjustment lever provided with the hinge in the opening on the right-side. Push the lever to the left until the opening is in the middle.

Push in the tension pin into the hole to the right of the lever. Ease up on the tension lever until the adjustment pin is touching the right side of the slot.

Open the door and let it swing freely to test the tension. If the tension is too light, the repeat the steps to increase it.

Read more: http://www.ehow.com/how_6664734_spring-hinge-instructions.html#ixzz2rt8L6MFg


1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.