Woodworking Talk banner
1 - 4 of 4 Posts

·
Registered
Joined
·
994 Posts
- Cut several copies of the curved face from 3/4" material, then glue them together for the depth.
- Build a form to bend the shape around, use bending plywood layers to get the thickness, veneer the faces after gluing some matching hardwood on the front and back.
- Cooper or barrel stave as mentioned by Cabinetman above.
- Glue up wood until you have enough thickness to cut the curves out of. Hope you have a bandsaw with enough throat depth. If not, do it in sections that will fit then glue them together.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top