Woodworking Talk banner

1 - 7 of 7 Posts

·
4Woodturning
Joined
·
352 Posts
Discussion Starter #1
Box Elder, sorry my pic didn't come out so well but thought i would share them any way. HF is 1/8 thick and about 6in by 7in finish with sealer and Beall buffing system.




 

·
Registered
Joined
·
3,257 Posts
Looks like a very nice piece. It would help if you shoot the normal view from a lower angle so we can see the form of the piece better. It looks like you might have done a good job on the form but you really can't tell from that angle.
 

·
Registered
Joined
·
5,031 Posts
Nice piece Jeff,
box elder? Where's your autograph on the bottom? Looks like a good place for it between the rings.:thumbsup:
Mike Hawkins;)
 

·
Registered
Joined
·
912 Posts
Nice Jeff, but I agree with Mike you gotta sign that badboy! What did you use for a background for your picture? I have been trying to learn a little about taking better pictures and have been trying to come up with cost effective backgrounds.

John
 

·
4Woodturning
Joined
·
352 Posts
Discussion Starter #7
I bought a neutral gray back ground roll 54" from eBay and made a photo tent. I am going to do what Mike does with the wood burner. I have a Razertip burnner i bought a few years ago and ever use it.
 
1 - 7 of 7 Posts
Top