Woodworking Talk banner

help with tree trunk (horizontal) slices

1865 Views 4 Replies 5 Participants Last post by  Paarker
I am trying to provide a horizontal slice of a tree trunk for a friends project. She will use this 14 inch diameter slice (from a tree trunk) to display a cake on. The slice is about 3 inches thick. As these slices sit in my garage (curing) they always split. I don't know what kind of tree they are from. Do I need to use a specific type of tree? I live in Dallas Texas and would sure appreciate some advice. Sadly, i can't attach a photo of the slices i've been working with but hopefully, you will understand from my explanation.
Thanks, [email protected]
1 - 1 of 5 Posts
You could fill the cracks with PL Premium and sand it smooth as long as you're putting a clear coat on. If you plan to stain them, it won't penetrate the glue.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.