Woodworking Talk banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,510 Posts
30 PSI sounds pretty high to me, I usually run at about 15 PSI (at the gun). The fluid knob may be out too far as well, tinkering with these adjustments and trying them on rosin paper or something should get you dialed in. My fluid knob adjustment is to tighten it all the way down and then back it out 1 1/2 turns. But these guns are all all different, that's just what works on my Wagner.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top