Woodworking Talk banner
  • Hello Everyone! Let us know what you would spend a $50 Amazon gift card on, HERE For a chance to win a $50 Amazon Gift Card!
1 - 4 of 4 Posts

·
Registered
Joined
·
58 Posts
Discussion Starter · #5 ·
Thanks for the information... Now that I am back from vacation I might have to do some experimenting on some scraps to see if I can manage to get this type of affect.
 

·
Registered
Joined
·
58 Posts
Discussion Starter · #11 ·
I know, I was more joking about the O/A than anything. I don't like running straight Acetylene for any length of time, it puts off way too much soot. I'll try the hand held propane torch though, much cheaper to burn and easier to work with.

If that's what you have (O/A), that set up will work, as well as straight acetylene. You just have to have the right distance from the subject and have enough movement to minimize the possibility of igniting the wood.








.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top