Woodworking Talk banner
1 - 7 of 7 Posts

·
James Daschel
Joined
·
96 Posts
Discussion Starter · #1 ·
I have never done a knife before and I thought I would try one. Got some crappy tang from woodcraft a while back when they were on sale. Wood is stabilized flame box elder.

First pic- Bookmatching the blank

Second pic- Running the blanks through the sander

Third pic- Doodling some outlines on the blanks

Fourth pic- I decided to make my own pins because the woodcraft one were kind of a stupid design. Instead of just a straight piece of metal.
 

Attachments

·
James Daschel
Joined
·
96 Posts
Discussion Starter · #2 ·
First pic- Blanks with drilled holes
Second pic- Rounded over the edges near the blade part
Third pic- Glue up with black eopxy
Fourth pic- The knife after lots and lots of sanding
 

Attachments

·
Registered
Joined
·
2,357 Posts
Very cool,Ive thought about making one.There are a lot of blades on ebay.
 
1 - 7 of 7 Posts
Top