Woodworking Talk banner
1 - 7 of 7 Posts

·
Old School
Joined
·
24,011 Posts
Discussion Starter · #1 ·
These cabinets took a long time due to all the inlays involved. The wave lines and circles are inlaid flush to the surface. There were 7 different wave lengths for a total of 53 to inlay. The circles were cut nickel size, and there were 27 of those. The side visible in the pictures was the dining room side, and those doors opened. On the reverse side, there were the same doors, but they were fixed. The upper cabinets had hinged glass doors on the side showing in the pictures, and mirror on the wall sides and on the section covering the soffit face. Inlays follow around the cabinets. Woods were ebony and satinwood, with oil based polyurethane finish rubbed out.

Thanks for looking.
 

Attachments

1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top