Woodworking Talk banner
1 - 2 of 2 Posts

225 Posts
Discussion Starter · #1 ·
Good day

For long time I was looking for some "reference line" to set the Drill Press fence distance easily and accurately and I'm talking about accuracy of a caliper...

The idea came to me from the router table fence setting that I made long time ago.

I used 8mm rod, measured with caliper but, you can use any diameter.
And, because I used 8mm rod I used 4mm drill bits (half the dia) as you will see

And the rest is on the pics


1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.