[GROOVY]

I am doing an inlay and came up with this ... glued two veneers together , sandwiched between two pieces of hardboard, cut with scrollsaw .

 

[GROOVY]

Forgot to mention that the hardboard was fastened with doublesided tape, a soak in lacquer thinner releases the tape and did not bother the titebond 2 that the veneer was laminated with. This worked well and I plan to use the hardboard shapes to scribe for the inlay. Only downside is I think the tempered hardboard was a bit rough on the scroll saw blades. Thanks for looking

 

[GROOVY]

Got done with the inlay. Turned out pretty good, had to redo the n because it wasn't seated deep enough in the field and sanded through the face lamination