Woodworking Talk banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2,304 Posts
Discussion Starter · #1 ·
I just got a new Penn State catalog. They have a new combined pepper mill/salt shaker(#PKGRIND924). Has anyone tried this yet? I am thinking about ordering one. I've looked on their site to see if they post instructions for their project like Craft Supply. I would like to know how it goes together before I purchase.
Tom
 

·
Registered
Joined
·
2,304 Posts
Discussion Starter · #3 ·

·
Registered
Joined
·
2,304 Posts
Discussion Starter · #4 ·
Pictures

I received the combined salt shaker/pepper mill kits yesterday. I made one last night. I did not go by their instructions which was to drill the holes and then turn the parts. I did it almost like I have all my other mills using firehawkmph instructions. I did not drill the hole all the way through the bottom while on the lathe. I cut it free and mounted in in the reverse direction in a pin jaw to drill the larger hole for the tenon. I did the same for the top. I will have to say it was very easy to make and assemble.
Tom
 

Attachments

1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top