Woodworking Talk banner
1 - 1 of 1 Posts

·
Registered
Joined
·
13,745 Posts
I would not do the assembly the way you have it laid out. I would glue up the skirt all of the way around the table and then lay in the sides of the drawer (the cross pieces). After that has all dried and is one solid piece I would cut out the piece where the drawer will be mounted.

Actually I would even leave at least a 1" section of the skirt over the drawer.

George
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top