Woodworking Talk banner
  • Hello Everyone! Let us know what you would spend a $50 Amazon gift card on, HERE For a chance to win a $50 Amazon Gift Card!
1 - 1 of 1 Posts

·
Registered
Joined
·
9 Posts
I did a quick search in my big book of hardware - I didn't see anything from Salice or Blum that will work. Most likely you will have to find a full inset hinge that looks good on outside of the cabinet. I wound't block it up either.

Good Luck

EDIT:

Blum has three options for a Inset Face Frame Hinge:
107, 120, and 170 degree opening.

For the 107 you need the following hinge with the following mounting plate
Blum 107 Degree Clip Top Hinge w/ Half Cranked Arm & Inset Face Frame Mounting Plate

They also have the "Blum 86 degree angle restriction clip" so doors won't hit each other.

It looks like you can get those with the soft close feature.

These require 35mm holes to be bored into the door
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top