Woodworking Talk banner
1 - 1 of 1 Posts

·
Registered
Joined
·
930 Posts
When I sat down to work out what I wanted in a router table, I made a detailed list of what I liked and, especially, what I didn't like about my old table. Once I had that put together, it was a fairly easy task to address each point as to whether it should be kept as is, modified some or scrapped and started fresh. I ended up going through the exercise twice to end up where I wanted to be on my third table. First table I bought so I would have a starting point. :smile:
That's exactly what I did :smile: and this is what I ended up with...

http://www.woodworkingtalk.com/f2/router-table-build-pics-54980/
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top