I have a 240v 50Hz 750W 1400rpm motor of an Axminster 211530 (AWHBS350N) bandsaw. It appears that the motor will not start on its own however will run when I self-start it. (move the spindle when powered up). I have done tonnes of research which keeps pinpointing the problem to two capacitors. I have replaced both capacitors however same fault is apparent. I have removed the brake and again no joy. When the start button is pressed the motor does is 'hum'.
I'm pulling my hair out, is their anyone who can help me to find a solution?
Now it is readable.Scott.