Woodworking Talk banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3,257 Posts
I've turned a bunch of Lacewood mirrors. Great stuff but you need to avoid sanding with the coarser grits. It has hard spots and soft spots and if you start sanding with a coarse grit it starts getting lumpy and is exagerated with each succeeding grit. I turn the lathe speed up and take a final pass with a really sharp tool to eliminate all but the high grits of sandpaper
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top