Woodworking Talk banner
1 - 1 of 1 Posts

·
Registered
Joined
·
470 Posts
In theory yes, but as mentioned may not be very accurate.

If you are interested in the weight method you can use it by obtaining a sample but not from an exposed end. Do as you originally were considering and weigh the original sample and compare to the dried sample. If I need moisture accuracy I use my powder scales and weigh in grains. This allows a sample to be dried in the microwave in just a few minutes or sun dried in a couple of hours using the afternoon summer sun.
 
1 - 1 of 1 Posts
Top