Woodworking Talk banner
1 - 5 of 5 Posts

·
Registered
Joined
·
266 Posts
As I said in another post, you don't need to sand the lacquer between coats. Just sand your first coat of poly or sanding sealer or shellac, then just layer on the lacquer coat by coat. If you do find a nib or a hair or something, just swipe at it with some 400 and spray again. If you are finding that you HAVE to sand between coats, you're spraying too heavy.

Nancy
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top